LiFePO4 Battery Charger 12V 50A AD168-E05

$80.00

LiFePO4 battery

1, input voltage: ac100-240v 47hz-63hz

2, open circuit voltage: 14.6V ± 0.73V

3, charging current: 30A

4, indicator light:

Red: charging
Green: charging finished
Fast red blinking: abnormal charging ---- Turn off power, reconnect charger and battery
Blinking green slowly: Standby mode ---- Have AC power connected, battery not connected

5, Terminal Type: Crocodile Clip (Suitable for all battery interfaces)

6, EMC, LVD comply with European CE standards

7, storage temperature: (-20 ℃) - (65 ℃)

8, operating temperature: (-20 ℃) - (45 ℃)

9, humidity: <95%

1, Before charging: Connect the positive and negative terminals correctly

Charger positive (+) (red line) Connected to the positive battery (red terminal)
Charger negative (-) (black line / white line) Connected to the negative battery (black terminal)
Warning: Wiring errors will damage the charger

2, Plug in the plug and turn on the AC power to start charging

3, After completing charging, first pull out the plug, disconnect the device from the mains, and then remove the battery cable

1, Make sure the battery positive and negative terminals are properly connected before charging.

2, Do not charge non-rechargeable batteries.

3, Non-professional technicians must not open the charger housing.

4, During the charging process, at least 10 cm space for heat dissipation, No obstructions in the air inlet and outlet

5, Warning: Do not store or use the charger under the following conditions

6, During charging, If there are abnormalities such as smell or high temperature, Turn off the power immediately

title